The Ideal Solution Starts Here
Our domestic range of screw piles ensure your foundations are supplied & installed to the correct depth to meet engineers specifications.
Our commercial screw piles cover a large range of loads to accommodate the needs of clients in the commercial building sector.
Ideal screw piles are efficiently used as raised piers to support mining camps, solar panels, granny flats as well as timber or steel bearer and joist sub-floors.
Call us for a quote on 02 9725 5522Request a Quote
Advantages of Screw Piles
Ideal screw piles when compared with concrete bored piers have a number of advantages:
- Speed of installation
- No spoil removal
- Cost effective
- Environmentally friendly
- Suitable for all soil types
- Control foundation costs
- Short lead-times
Our engineer Rafeletos Zanuttini recommended Ideal Foundations for two Housing NSW projects, one with 16 units and villas and the other an 11-unit residential development. Both sites consisted of highly reactive ‘H’ soil and were also classified as problem ‘P’ type. Ideal Foundations tested the soil before starting the project, calculated the depths each pier needed to be to reach stable soil, and provided a lump sum package before starting contract works on site. Our calculations showed on these sites that the deeper the piers, the cheaper the screw pile alternative becomes. Ideal Foundations made a big difference as the works were completed in a prompt, clean and safe manner. There was minimal spoil to remove from site following the installation of the screw piers. Ideal Foundations also guaranteed the work and provided the appropriate certification. What more could a builder want?
One of the cornerstones of our success is our ability to offer “true fixed price” homes. Typically, the foundations are the biggest unknown and therefore the most likely area for cost overrun. It’s essential to get the pier design right before construction begins. Ideal Foundations provide a fixed, guaranteed cost, which makes our job a lot easier. We use their screw piers on around 70% of our homes. They are ideal on difficult sites near the coast or on filled sites.
The deciding factor for us was the fixed-price quote. At first we were a bit nervous about the new technology but Ideal Foundations talked us through it and put our minds at ease. Their customer service is second to none. They carried out a geotech survey and designed the best system for us. We have very reactive soil and the uniform support provided by the screw piers prevents differential settling, which could have been a problem down the track with a conventional slab.
On sites where concrete piers can’t be used, Ideal Foundations are up there with the best as an alternative foundation. Ideal Foundations carry out a geotech survey, classifies the soil, designs the pier placement and organizes the installation, all at a fixed price. In sandy soils, where concrete piers have to be drilled, sleeved and filled, you might have 180 lineal metres of piers with 450mm diameters – that’s a lot of extra soil to be transported off site. Screw piers make it quick, clean and easy.
We use Ideal Foundations on difficult sites, particularly those with sandy soils. We know the cost beforehand so we can provide a fixed price. We also know that every pier has the same loading, whereas with conventional piers you are never 100% sure. At pier depths greater than about 1.5 metres the screw piers are more economical than concrete, and you don’t have a lot of excess spoil to remove from the site.
When our clients request screw piers, we specify Ideal Foundations. They have a larger capacity than other standard screw piles and provide good dimensional accuracy in placement. Ideal Foundations is also a reliable company with a fast response time. I believe screw piers should be used more widely, not just on difficult sites.